+31(0)174-671 800
Terminator T1
101-00211A

Terminator T1

The T1 Terminator provides active and reliable termination for PROFIBUS segments which are based on RS 485. By using this component it is possible to turn off, remove or replace devices without disturbing the bus communication.

  • Removable screw terminals and 1 DB9 connector
  • Supports all PROFIBUS RS 485 protocols
  • DIN-rail mounting
Request offer

Information

The T1 has a couple of special features which makes it a very useful infrastructure component; a redundant power supply and diagnostic LEDs to indicate the status of each power source. It is also equipped with an additional DB9 connector for ProfiTrace or other maintenance/engineering tools. The DB9 connector can also be used as the primary bus connection if circumstances so dictate.

The T1 Terminator can be installed on a standard DIN-rail.

Technical specifications

PROFIBUS

  • 390 / 220 / 390 Ohm
  • Supports all PROFIBUS RS 485 protocols
  • 9.6 kbps..12 Mbps
  • Removable screw terminals and 1 DB9 connector

Power supply

  • Operating Voltage: 19..28 VDC
  • Current consumption: < 60 mA
  • Current consumption: < 60 mA
  • Diagnostic LEDs to indicate the status of the power supply

Ambient conditions

  • Operating temperature: -20..+60 °C

Dimensions and weight

  • Dimensions (LxWxH): 106 x 55 x 33 mm (without plugs)
  • 125 g

Others

  • DIN-rail mounting
  • IP 20 classification
UL listed

Want more information? Ask us.

Marco Bekker NLD, ENG, GER

Marco Bekker

Sales Engineer
T: +31 (0)174 671800

Service & Support

FAQ's

Check the most frequently asked questions about ComBricks.

On-site & Online Support

Worldwide PROFIBUS and PROFINET support; on-site and online.

Network Certification

Find out what PROCENTEC can certify in your network.

GSD files

Find and download all the GSD files you need.

Software & Firmware downloads

Request firmware, software and download GSD-files.

Training

  • Certified PROFIBUS Engineer

    10 October 2016, 31 October 2016, 12 December 2016

    'Distinguish yourself from the others and show that you are the expert.....Become a Certified PROFIBUS Engineer.'

  • PROFIBUS Troubleshooting & Maintenance

    16 November 2016

    The PROFIBUS Troubleshooting and Maintenance training course is fully concentrated on those who install and maintain PROFIBUS installations.

  • PROFIBUS Troubleshooting & Maintenance - USA edition

    07 November 2016, 09 November 2016

    The PROFIBUS Troubleshooting and Maintenance training course is fully concentrated on those who install and maintain PROFIBUS installations.

Training overview