+31(0)174-671 800
ProfiHub F1
123-022MM01-ST

ProfiHub F1

Does your PROFIBUS DP installation require fiber optic data transmission? The ProfiHub F1 is a robust network component that converts RS-485 bus to multimode fiber optics with minimum data delay. The ProfiHub F1 meets industrial level EMC specifications. It is designed for harsh industrial usage as well as road or railway installations.

  • Point-to-point, line, star and ring configuration
  • Ranges up to 5 km
  • Network diagnostics
Request offer Brochure

The ProfiHub F1 is used to convert PROFIBUS-fieldbus network signals from copper to fiber optics. It should be installed on a DIN Rail. The device can work as a ring module or in a line or point-to-point structure. If a message is received on a channel, it is electronically processed, amplified and switched to the remaining channels.

The system contains one channel with a DB9 connection and two channels for fiber optic ring ST Multimode at 1310 nanometers wavelength.

Conform to strict safety standards

The ProfiHub F1 is rugged to electrical and magnetic interferences. The potential separation of transmitter and receiver as well as ranges up to 5 km between two fiber optic systems are important performance features of the transmission with multimode fiber optics.

The system is especially suitable for applications with strict safety requirements, for instance applications in process industry, tunnel ventilation systems and railway technology.

Network diagnostics

Connected with PROCENTEC ComBricks, the ProfiHub F1 enables the unique FiberView feature for network diagnostics. This works similarly to a traffic light. If the traffic light on the device is green, everything is fine. Seeing a yellow light means the budget is still tolerable, but already below a certain system reserve. A red light means there is a serious error. The benefit of this feature is that you will get an early warning when the fiber isn’t optimal.

Your benefits

Technical specifications

General specifications

  • Dimensions D × W × H: 113mm × 61mm × 115mm
  • Weight: 500 grams
  • Material: Stainless steel, powder-coated
  • Mounting: DIN rail

Ambient conditions

  • Operating temperature: ‐40° ... +70° Celsius
  • Storage temperature: ‐40° ... +85° Celsius
  • EMC: EN61000-6-2 / EN55022 Class B +A1 + A2
  • Ingress Protection: IP 20

Power supply

  • Operating voltage: 12 ... 30 VDC
  • Power consumption: 5 Watts, 200 mA (24V)
  • Potential separation: 500 VDC
  • Failure relay contact: 25VDC (1A) / 60VDC (0,3A)

Want more information? Ask us.

Marco Bekker NLD, ENG, GER

Marco Bekker

Sales Engineer
T: +31 (0)174 671800

Downloads

User Manual
Brochure

Service & Support

FAQ's

Check the most frequently asked questions about ComBricks.

On-site & Online Support

Worldwide PROFIBUS and PROFINET support; on-site and online.

Network Certification

Find out what PROCENTEC can certify in your network.

GSD files

Find and download all the GSD files you need.

Software & Firmware downloads

Request firmware, software and download GSD-files.

Training

  • Certified PROFIBUS Engineer

    22 January 2018, 09 April 2018, 11 June 2018

    'Distinguish yourself from the others and show that you are the expert.....Become a Certified PROFIBUS Engineer.'

  • PROFIBUS Troubleshooting & Maintenance

    22 January 2018, 06 February 2018, 06 March 2018

    The PROFIBUS Troubleshooting and Maintenance training course is fully concentrated on those who install and maintain PROFIBUS installations.

  • Certified PROFIBUS Installer

    22 January 2018, 06 February 2018, 06 March 2018

    The Certified PROFIBUS Installer course is essential for electrical engineers and technicians requiring the necessary installation and testing skills for their PROFIBUS DP/PA projects.

Training overview