+31(0)174-671 800
VPGate PROFINET to Serial
110-00012A

VPGate PROFINET to Serial

VPGate PROFINET to serial is a PROFINET gateway that enables the exchange of real-time data between a PROFINET IO network and any equipment with a serial link. Data can easily be visualized by the user via an integrated webpage. In addition to relevant diagnostic alarms, this ensures the optimal integration of equipment in your network.

Request offer Brochure

About VPGate PROFINET to serial

The VPGate allows for effective diagnosis via the integrated webpage. Here the user can access maintenance information. The gateway has an integrated switch in addition to diagnostic LEDs on the front panel.

The VPGate can easily be replaced during maintenance as no prior configuration is needed and all data is stored in the PROFINET IO.

This product is an economically attractive solution to enable integration in an existing network and is certified by PROFIBUS International.

Technical specifications

Main side

  • Connection: 2 Port / RJ-45
  • Protocols: PROFINET
  • Features: auto-negotiation / auto crossover / auto polarization / MRP-client
  • Operation mode: IO-Device / MODBUS Server / MODBUS Gateway
  • Speed: 10 / 100 Mbps
  • Configuration method: GSD file via standardized configuration tool
  • Device access: HTTP (integrated webpage), FTP, SNMP, v1
  • I/O Capabilities: 1 input isolated 0 – 24 V, 1 relay output

Serial side

  • Connection: Full Duplex RS232, Half Duplex RS-485 via PIN Connector
  • Protocols: MODBUS RTU or ASCII Server / Transparent
  • Operation mode: MODBUS master or slave / Transparent
  • Speed: 1.2, 2.4, 4.8, 9.6, 19.2, 38.4, 57.6, 115.2 Kpbs
  • Data Exchange: 7 or 8 bits
  • Termination: Active for RS-485
  • Function supported: MODBUS: 1, 2, 3, 4, 5, 6, 7, 15, 16, 23
  • Function supported: Transparent mode: end of frame character, known length, on timeout

Mechanical and Electrical Specifications

  • Power supply: 24 VDC @ 1.7 W

Others

  • Dimensions: 120 x 100 x 23 mm
  • Operating temperature: 0 .. 55 °C
  • Weight: 130 g
ePLAN

Want more information? Ask us.

Marco Bekker NLD, ENG, GER

Marco Bekker

Sales Engineer
T: +31 (0)174 671800

Downloads

Brochure
User manual

Service & Support

FAQ's

Check the most frequently asked questions about ComBricks.

On-site & Online Support

Worldwide PROFIBUS and PROFINET support; on-site and online.

Network Certification

Find out what PROCENTEC can certify in your network.

GSD files

Find and download all the GSD files you need.

Software & Firmware downloads

Request firmware, software and download GSD-files.

Training

  • Certified PROFIBUS Engineer

    22 January 2018, 09 April 2018, 11 June 2018

    'Distinguish yourself from the others and show that you are the expert.....Become a Certified PROFIBUS Engineer.'

  • PROFIBUS Troubleshooting & Maintenance

    22 January 2018, 06 February 2018, 06 March 2018

    The PROFIBUS Troubleshooting and Maintenance training course is fully concentrated on those who install and maintain PROFIBUS installations.

  • FREE ProfiTrace Training

    13 March 2018, 15 May 2018, 11 September 2018

    This free training is concentrated on the number 1 troubleshooting tool for PROFIBUS networks.

Training overview