+31(0)174-671 800
VPGate PROFIBUS to Serial
110-00011A

VPGate PROFIBUS to Serial

The VPGate PROFIBUS DP to serial is a gateway/converter between PROFIBUS DP and serial/MODBUS. It enables a fast connection of any serial/MODBUS device to a PROFIBUS system at a low cost. It is designed for quick and easy integration. No additional software is needed as it can be easily configured via any PROFIBUS configuration management tool.

Request offer Brochure

About VPGate PROFIBUS DP to serial

The VPGate is built into the system and no knowledge of coding is needed for configuration. The PROFIBUS configuration tool is easy to use by personnel.
On the PROFIBUS side it is a DP slave, and on the serial/MODBUS side master or slave. The parameters and behavior are configured simply through the GSD file in the configuration tool of the PROFIBUS master.
The VPGate is an economically attractive solution to enable integration in an existing network.

Technical specifications

Main side

  • Connection: DB9 female connector
  • Protocols: PROFIBUS DP
  • Features: PROFIBUS DP (DP, V0, DP V1), sync, freeze, fail-safe
  • Operation mode: slave
  • Speed: 9.6 Kbps – 12 Mbps (auto detection)
  • Configuration method: GSD file via standardized configuration tool
  • Device access: Via PROFIBUS master
  • I/O Capabilities: 1 input isolated 0 – 24 V, 1 relay output

Serial side

  • Connection: Full Duplex RS232, Half Duplex RS-485 via PIN Connector
  • Protocols: MODBUS RTU or ASCII Server / Transparent
  • Operation mode: MODBUS master or slave / Transparent
  • Speed: 1.2, 2.4, 4.8, 9.6, 19.2, 38.4, 57.6, 115.2 Kpbs
  • Data Exchange: 7 or 8 bits
  • Termination: Active for RS-485
  • Function supported: MODBUS: 1, 2, 3, 4, 5, 6, 7, 15, 16, 23
  • Function supported: Transparent end-of-frame: end of frame character, known length, on timeout

Mechanical and Electrical Specifications

  • Power supply: 10..30 VDC @ 1.5 W

Others

  • Dimensions: 120 x 100 x 23 mm
  • Operating temperature: 0 .. 55 °C
  • Weight: 130 g

Want more information? Ask us.

Marco Bekker NLD, ENG, GER

Marco Bekker

Sales Engineer
T: +31 (0)174 671800

Downloads

Brochure
User manual

Service & Support

FAQ's

Check the most frequently asked questions about ComBricks.

On-site & Online Support

Worldwide PROFIBUS and PROFINET support; on-site and online.

Network Certification

Find out what PROCENTEC can certify in your network.

GSD files

Find and download all the GSD files you need.

Software & Firmware downloads

Request firmware, software and download GSD-files.

Training

  • Certified PROFIBUS Engineer

    22 January 2018, 09 April 2018, 11 June 2018

    'Distinguish yourself from the others and show that you are the expert.....Become a Certified PROFIBUS Engineer.'

  • PROFIBUS Troubleshooting & Maintenance

    22 January 2018, 06 February 2018, 06 March 2018

    The PROFIBUS Troubleshooting and Maintenance training course is fully concentrated on those who install and maintain PROFIBUS installations.

  • FREE ProfiTrace Training

    13 March 2018, 15 May 2018, 11 September 2018

    This free training is concentrated on the number 1 troubleshooting tool for PROFIBUS networks.

Training overview