+31(0)174-671 800
Siemens DP/DP coupler
40230

Siemens DP/DP coupler

The DP/DP coupler is the component of choice to establish communication between 2 DP class 1 masters that control their own specific network.

Request offer

About the Siemens DP/DP coupler

It consists out of 2 DP slaves which continuously copy the output data to the input data of the other (and vice versa). The slaves have to be integrated in the configuration of the masters (every master controls 1 slave).

The outcome is a mailbox with a maximum of 244 bytes input and 244 bytes output. The networks can have different baudrates and bus parameters. The bus addresses of both slaves can be set by 2 DIP switches.

Application areas

Technical specifications

General

  • Isolation class: IP 20
  • Power and bus status monitoring via LEDs

PROFIBUS Specifications

  • Connector: DB9
  • 12 Mbps
  • Bus address: DIP switches
  • Data exchange: up to 244 bytes of input and output data
  • Galvanic isolation between the DP networks

Power supply specifications

  • Operating Voltage: 24 V
  • Current consumption: 150 mA

Ambient conditions

  • Operating temperature: 0..+60 °C

Dimensions and Weight

  • Dimensions (WxHxD) : 40 x 127 x 117 mm
  • Weight: 250 g

Want more information? Ask us.

Marco Bekker NLD, ENG, GER

Marco Bekker

Sales Engineer
T: +31 (0)174 671800

Where to buy?

PROCENTEC works with many distributors world wide. To find your local distributor please visit our distributor page.

Distributors

Service & Support

FAQ's

Check the most frequently asked questions about ComBricks.

On-site & Online Support

Worldwide PROFIBUS and PROFINET support; on-site and online.

Network Certification

Find out what PROCENTEC can certify in your network.

GSD files

Find and download all the GSD files you need.

Software & Firmware downloads

Request firmware, software and download GSD-files.

Training

  • Certified PROFIBUS Engineer

    22 January 2018, 09 April 2018, 11 June 2018

    'Distinguish yourself from the others and show that you are the expert.....Become a Certified PROFIBUS Engineer.'

  • PROFIBUS Troubleshooting & Maintenance

    22 January 2018, 06 February 2018, 06 March 2018

    The PROFIBUS Troubleshooting and Maintenance training course is fully concentrated on those who install and maintain PROFIBUS installations.

  • FREE ProfiTrace Training

    13 March 2018, 15 May 2018, 11 September 2018

    This free training is concentrated on the number 1 troubleshooting tool for PROFIBUS networks.

Training overview