+31(0)174-671 800
SCOPE Repeater
101-201210

SCOPE Repeater

1 Channel RS 485 PROFIBUS diagnostic repeater module with integrated quality-oscilloscope for 12 Mbps with diagnostic LEDs and redundancy feature. Bus connection is utilized by screw terminals and additional DB9 connector.

Request offer

Introduction

null

The repeater channel and the integrated oscilloscope are directly connected with the ProfiTrace OE core in the 1B/1C Head Station. Scope images and busmonitor data are directly available in the web server.

The advanced 12 Mbps core of the repeater module can be cascaded unlimitedly and has increased RS 485 strength. The data traffic is constantly monitored for glitches which are digitally filtered out. It has on-board switchable termination and able to drive 31 devices.

UL-listed

This product is UL-listed. Read more about UL-certification.

Technical specifications

Electrical & Mechanical

  • 1 Bus channel
  • 31 devices/bus-loads per channel
  • 1200 m cable length (depends on baudrate)
  • No limit in cascading
  • Termination switches for each channel
  • Removable screw terminals and 1 DB9 connector

Protocol

  • Transparent for all PROFIBUS protocols
  • 9.6 kbps .. 12 Mbps (auto detection)
  • 2 bits delay time (12 bits in redundant mode)
  • No address required
  • Bus redundancy (selectable)
  • Transmission speed detection: Auto detect (< 10 s detection and 50 s time out)
  • Delay time (normal mode): 2.0 TBit at 9.6 kbps .. 3 Mbps; 2.75 TBit at 6 Mbps; 3.75 TBit at 12 Mbps
  • Delay time (redundant mode): 12.0 TBit at 9.6 kbps .. 3 Mbps; 12.75 TBit at 6 Mbps; 13.75 TBit at 12 Mbps
  • Delay time jitter: Max. ¼ Tbit
  • Wire diameter (for the screw terminals): < 1.5 mm2
  • Wire type: stranded or solid core
  • Fiber optic cable delay calculation

Oscilloscope

  • Frequency: 192 MS/s
  • Resolution: 50 mV
  • Differential range: -6.436..6.436 V

Backplane

  • 4 Networks selectable with switches
  • 10 Modules (positioned in the first 10 slots)
  • 500 mA current consumption
  • Power supply: provided through the backplane
  • Compatible backplane units: 101-200011, 101-200012, 101-200023, 101-200024, 101-200027

Web server

  • Oscilloscope images of connected devices (diff.)
  • Last, Min, Max bus signals
  • Bar graph of connected devices
  • Email on telegram errors and low bus signals

Others

  • Operating temperature: 0 .. 60 °C
  • Dimensions (LxWxH): 140 x 110 x 25 mm (without backplane)
  • Weight: 121 g
  • Head station firmware: 1.260 and higher
CE PB UL listed ePLAN

Want more information? Ask us.

Marco Bekker NLD, ENG, GER

Marco Bekker

Sales Engineer
T: +31 (0)174 671800

Downloads

All available SCOPE REPEATER downloads

Datasheet
Manual
DWG Drawing

Service & Support

FAQ's

Check the most frequently asked questions about ComBricks.

On-site & Online Support

Worldwide PROFIBUS and PROFINET support; on-site and online.

Network Certification

Find out what PROCENTEC can certify in your network.

GSD files

Find and download all the GSD files you need.

Software & Firmware downloads

Request firmware, software and download GSD-files.

Training

  • Certified PROFIBUS Engineer

    04 February 2019, 08 April 2019, 16 September 2019

    'Distinguish yourself from the others and show that you are the expert.....Become a Certified PROFIBUS Engineer.'

  • PROFIBUS Troubleshooting & Maintenance

    04 February 2019, 12 March 2019, 08 April 2019

    The PROFIBUS Troubleshooting and Maintenance training course is fully concentrated on those who install and maintain PROFIBUS installations.

  • FREE ProfiTrace Training

    This free training is concentrated on the number 1 troubleshooting tool for PROFIBUS networks.

Training overview