https://www.hms-networks.com
Head Station Type 1Z with basic web server
101-210011B

Head Station Type 1Z with basic web server

The Head Station is the primary element of ComBricks and has to be inserted in the most left slot of the fixed backplane socket. It schedules the interaction between all modules and provides data storage and an Ethernet interface for the user.

Request offer

Introduction

The Headstation 1Z is an enhanced type that contain a ProfiTrace core for monitoring 4 PROFIBUS networks and an advanced web server for permanent remote maintenance of the PROFIBUS installation over Ethernet (hardware is identical as a type 1C).
For monitoring repeater modules or slave modules are required to provide PROFIBUS telegrams on the backplane network.

Through the ProfiTrace 2 software package, OPC tags can be directly streamed from the Head Station type 1Z. ProfiTrace 2 will run with full monitoring functionality and the user can benefit from its features.

The Head Station provides power to all modules through its redundant power supply.The Type 1Z is a temporary replacement unit for the Headstation Type 1C. Its functionalities are the same with he following limitations:

Additional information on the unit can be found in the technical manual.

Head Station Type 1C with ProfiTrace OE

 

 

UL-listed

This product is UL-listed. Read more about UL-certification.

Technical specifications

General

  • 32 (10 repeater modules positioned in the first 10 slots)
  • Redundant power supply
  • uSD card holder for 32 GB (SD and SDHC)
  • USB connector for firmware updates
  • Head station: ProfiTrace OE

Ethernet

  • 10 / 100 Mbps link speed
  • Protocols: HTTP, FTP, SMTP, TELNET, SNMP
  • Ethernet connector: RJ-45
  • Ethernet cable length: max. 100m
  • Ethernet MAC address: 9C.B2.06.xx.xx.xx (label on the side of the Head Station)
  • Ethernet default IP address after reset/purchase: 192.168.1.254
  • Ethernet connections: 20 simultaneous web server clients

Basic web server

  • Status of all modules
  • System log

Power supply

  • Operating voltage: 11 .. 26 VDC
  • Backplane current: 2.5 A
  • Current consumption: 800 mA (fully loaded)
  • Power: 20W
  • Reverse polarity protection: Yes
  • Wire diameter: < 2.5 mm2

Relay contact

  • Relay contact resistance: 300 mOhm (plug included)
  • Relay contact current: 0.5A
  • Relay contact voltage: 24 VAC

Others

  • Operating temperature: 0..60 °C
  • Dimensions (LxWxH): 115 x 100 x 25 mm (without backplane)
  • Weight: 150 g
UL listed ePLAN