+31(0)174-671 800
FOUNDATION Fieldbus Diagnostics Module
101-240610

FOUNDATION Fieldbus Diagnostics Module

FOUNDATION Fieldbus network diagnostics has never been so open and easy. The ComBricks Diagnostic Module is able to permanently check the condition of the H1 physical layer. By means of a web server the signal quality of the connected devices can be inspected and emails inform the user about critical events. Notifications and remote access assure an optimal network uptime and reduced maintenance costs.

Request offer

Introduction

The ComBricks FOUNDATION Fieldbus Diagnostics Module is not an active device and therefor does not require an address. It passively measures the network condition and can be wired parallel or series to/in an existing H1 segment.

FF modules can be combined with PROFIBUS DP and PA diagnostics modules to offer a complete installation overview to the user.

FOUNDATION Fieldbus Module - Segments null

 

UL-listed

This product is UL-listed. Read more about UL-certification.

 

Technical specifications

Web server

  • Oscilloscope images of all connected devices
  • Bar graph of all connected devices
  • Last, Min, Max values of the bus signals
  • DC voltage, DC current and signal jitter
  • Email on low bus signals
  • Live list

FOUNDATION Fieldbus

  • 33 VDC measureable bus voltage
  • 500 mA measureable bus current
  • 10 mA current consumption
  • Termination is NOT integrated
  • 32 devices (depends on current consumption)
  • 31.25 kbps MBP signal
  • 1900 m cable length (depends on trunk current)

Connectors

  • 2 Removable OUT connectors (1-on-1)
  • 1 Removable IN connector (for current measurement)
  • < 2.5 mm2 wire diameter (stranded or solid core)
  • 2 removable FF screw terminals (1-on-1)

Backplane

  • 10 FF modules (positioned in the first 10 slots)
  • 350 mA current consumption per module
  • Power supply: provided through the backplane
  • Compatible backplane units: 101-200011, 101-200012, 101-200023, 101-200024, 101-200027
  • Cable length: Max. 1900 m cable length (FF specifications)

Oscilloscope specifications

  • AC FF voltage: 4 MS/s, resolution 7.5 mV, range -0.95 .. 0.95 V
  • DC FF voltage: 1 kS/s, resolution 75 mV, range -38 .. 38 V
  • DC FF current: 1 kS/s, resolution 1 mA, range 0 .. 1024 mA

Others

  • Diagnostic LEDs
  • Required Head Station firmware: V1.279 and later
  • Operating temperature: 0..60 °C
  • Dimensions (LxWxH): 115 x 100 x 25 mm (without backplane)
  • Weight: 133 g
  • Operating temperature: 0 .. 60 °C
  • Head station firmware: 1.279 and higher
UL listed

Want more information? Ask us.

Marco Bekker NLD, ENG, GER

Marco Bekker

Sales Engineer
T: +31 (0)174 671800

Downloads

Below you can find all the available downloads for this product

Datasheet
Manual
Software

Service & Support

FAQ's

Check the most frequently asked questions about ComBricks.

On-site & Online Support

Worldwide PROFIBUS and PROFINET support; on-site and online.

Network Certification

Find out what PROCENTEC can certify in your network.

GSD files

Find and download all the GSD files you need.

Software & Firmware downloads

Request firmware, software and download GSD-files.

Training

  • Certified PROFIBUS Engineer

    04 February 2019, 08 April 2019, 16 September 2019

    'Distinguish yourself from the others and show that you are the expert.....Become a Certified PROFIBUS Engineer.'

  • PROFIBUS Troubleshooting & Maintenance

    11 December 2018, 04 February 2019, 12 March 2019

    The PROFIBUS Troubleshooting and Maintenance training course is fully concentrated on those who install and maintain PROFIBUS installations.

  • FREE ProfiTrace Training

    This free training is concentrated on the number 1 troubleshooting tool for PROFIBUS networks.

Training overview