+31(0)174-671 800
2 Channel Repeater
101-201102

2 Channel Repeater

2 Channel standard RS 485 PROFIBUS repeater module for 12 Mbps with diagnostic LEDs and redundancy feature. Bus connection is utilized by screw terminals and additional DB9 connector.

Request offer

Introduction

null

The repeater channels are directly connected with the ProfiTrace OE core in the 1B/1C Head Station. Busmonitor data is directly available in the web server.

The advanced 12 Mbps core of the repeater module can be cascaded unlimitedly and has increased RS 485 strength. The data traffic is constantly monitored for glitches which are digitally filtered out. Every channel has on-board switchable termination and able to drive 31 devices.

Technical specifications

Electrical & Mechanical

  • 2 Bus channels
  • 31 devices/bus-loads per channel
  • 1200 m cable length (depends on baudrate)
  • No limit in cascading
  • Termination switches for each channel
  • Removable screw terminals (included) and/or 1 DB9 connector

Protocol

  • PROFIBUS DP
  • DP-V0, DP-V1, DP-V2, FDL, MPI, FMS, PROFIsafe, PROFIdrive and any other FDL based protocol
  • All baudrates
  • No bus address required

Backplane

  • 4 Networks selectable with switches
  • 10 Modules (positioned in the first 10 slots)
  • 300 mA current consumption

Others

  • LEDs (Error, Rx data, Termination ON)
  • Operating temperature: 0..60 °C
  • Dimensions: 140 x 110 x 25 mm
  • Weight: 150 g
UL listed

Want more information? Ask us.

Haydar Al Sawad NLD, ENG, ARA

Haydar Al Sawad

Haydar Al Sawad
T: +31 (0)174 671800

Downloads

Below you can find all the available downloads for this product

Datasheet
Manual
DWG Drawing

Service & Support

FAQ's

Check the most frequently asked questions about ComBricks.

On-site & Online Support

Worldwide PROFIBUS and PROFINET support; on-site and online.

Network Certification

Find out what PROCENTEC can certify in your network.

GSD files

Find and download all the GSD files you need.

Software & Firmware downloads

Request firmware, software and download GSD-files.

Training

  • Certified PROFIBUS Engineer

    10 October 2016, 31 October 2016, 12 December 2016

    'Distinguish yourself from the others and show that you are the expert.....Become a Certified PROFIBUS Engineer.'

  • PROFIBUS Troubleshooting & Maintenance

    16 November 2016

    The PROFIBUS Troubleshooting and Maintenance training course is fully concentrated on those who install and maintain PROFIBUS installations.

  • PROFIBUS Troubleshooting & Maintenance - USA edition

    07 November 2016, 09 November 2016

    The PROFIBUS Troubleshooting and Maintenance training course is fully concentrated on those who install and maintain PROFIBUS installations.

Training overview