+31(0)174-671 800
PROFIBUS DP Festoon Cable

PROFIBUS DP Festoon Cable

PROFIBUS DP festoon cable for large and small cable loops. The cable carries its own weight but is not suitable for tensile stress > 80 N. To help to avoid twisting the cable during installation, the outer sheath has a line printed along its full length.

Request offer

Technical specifications

Electrical characteristics

  • Impedance: 150 ± 15 Ohm
  • Loop resistance: 133 Ohm/km
  • Shield resistance: < 19 Ohm/km
  • Capacitance: < 28,5 nF/km
  • Inductance: 750 uH/km
  • Attenuation: 49 dB/km (16 MHz)

Mechanical characteristics

  • Construction: 1 x 2 x 0,64 mm (23 AWG) with fillers
  • Wire type: Stranded conductor
  • Cable thickness: 8,0 mm
  • Weight: 64 kg/km
  • Sheath and wire colors: Petrol and red/green
  • Fast Connect (FC): No

Environment and approvals

  • Operating temperature: -40..+80 °C
  • Jacket/sheath: PVC
  • UL listing: CMG and CL3
  • Halogen free: No
  • Sunlight resistance: UL 1581 Sec. 1200
  • Resistance to oil/grease: UL 758 Sec. 15 (60°C)
  • Flame retardant: UL 1685 (CSA FT 4)

Trailing characteristics

  • 5 Million bending cycles
  • Acceleration 4 m/s²
  • Minimum bending diameter: > 30 mm


Below you can find all the available downloads for this product




Due to higher loop resistance, shield resistance and attenuation it has reduced segment lengths.

The strain reliefs of the cable roller assemblies must be fitted out with rubber clutches in order to avoid too strong bruise of the conductor.

Service & Support


Check the most frequently asked questions about ComBricks.

On-site & Online Support

Worldwide PROFIBUS and PROFINET support; on-site and online.

Network Certification

Find out what PROCENTEC can certify in your network.

GSD files

Find and download all the GSD files you need.

Software & Firmware downloads

Request firmware, software and download GSD-files.


  • Certified PROFIBUS Engineer

    10 February 2020, 09 March 2020

    'Distinguish yourself from the others and show that you are the expert.....Become a Certified PROFIBUS Engineer.'

  • PROFIBUS Troubleshooting & Maintenance

    10 December 2019, 22 January 2020, 09 March 2020

    The PROFIBUS Troubleshooting and Maintenance training course is fully concentrated on those who install and maintain PROFIBUS installations.

  • ProfiTrace Training

    This training is concentrated on the number 1 troubleshooting tool for PROFIBUS networks.

Training overview