+31(0)174-671 800
Fault Generator
10100313A

Fault Generator

The PROCENTEC Fault Generator is a tool that mimics a fault on the physical electrical bus layer of your PROFIBUS DP network. It is designed for use by support / training, sales and technical engineers, as it enables you to quickly re-create an error for demonstration or for verification of operations during commissioning.

Request offer Brochure

How to use the PROFIBUS Fault Generator:

  1. See below which faults can be simulated in your PROFIBUS DP network.
  2. Insert screw driver and set the rotary switch to create a change on the physical bus layer.
  3. Plug the PROCENTEC Fault Generator into any DB9 connector.

The PROCENTEC Fault Generator is the must-have tool for testing alarms or diagnostics, designed to fit your pocket.

0 and 1 - Okay

Fault Generator example 1

2, 3, 6, 7, A, B, E, F - Short circuit between A and B

Fault Generator example 3

Fault Generator example 2 Fault Generator example 4

8 and 9 - Short circuit between B and ShieldFault Generator example 6

4, 5, C, D - Short circuit between A and B with an extra 15Ω termination Fault Generator example 5

Fault Generator

Fault Generator

Your benefits

These products are also interesting for you

Technical specifications

General specifications

  • Dimensions (L x W x H): 50mm x 30mm x 15mm
  • Weight: 15 grams

Want more information? Ask us.

Marco Bekker NLD, ENG, GER

Marco Bekker

Sales Engineer
T: +31 (0)174 671800

Downloads

All available downloads

Product card

Service & Support

FAQ's

Check the most frequently asked questions about ComBricks.

On-site & Online Support

Worldwide PROFIBUS and PROFINET support; on-site and online.

Network Certification

Find out what PROCENTEC can certify in your network.

GSD files

Find and download all the GSD files you need.

Software & Firmware downloads

Request firmware, software and download GSD-files.

Training

  • Certified PROFIBUS Engineer

    04 February 2019, 08 April 2019, 16 September 2019

    'Distinguish yourself from the others and show that you are the expert.....Become a Certified PROFIBUS Engineer.'

  • PROFIBUS Troubleshooting & Maintenance

    04 February 2019, 12 March 2019, 08 April 2019

    The PROFIBUS Troubleshooting and Maintenance training course is fully concentrated on those who install and maintain PROFIBUS installations.

  • FREE ProfiTrace Training

    This free training is concentrated on the number 1 troubleshooting tool for PROFIBUS networks.

Training overview